Posted on Leave a comment

Layered Fused Glass Cabochons and More

Fused Glass Cabochons

Hope you are enjoying this journey and I sincerely hope that I haven’t bored you into saying goodbye. Please hang in there, things will get more interesting.

This was another full fuse for cabochons, some dots and a puddle. You may ask why another test. Well, I firmly believe that testing to see what happens is a great way to learn. The mistakes and the surprising wins all are great teachers.

In this firing we are trying different numbers of layers all together to see how they work together in a firing schedule really set for the bigger pieces.

Continue reading Layered Fused Glass Cabochons and More
Advertisements
Posted on Leave a comment

First Slumped Fused Glass Bowl

Fused Glass Slumped Bowl

Hey, I’m getting game now. Time to try making a fused glass slumped bowl.

In our first purchase of materials we did purchase a couple of ceramic molds for bowls. As usual, we don’t do things by halves so we purchased the largest bowl that would fit in our Paragon Fusion 14 kiln. The kiln is square, so a square bowl seemed logical. To be honest, we did purchase 2 other molds that are smaller, so I do have moments of being reasonable.

The final design was the result of looking at what offcuts I had. We decided not to start using the large sheets we purchased initially, not until my skills improved, so I continue to try and use offcuts where possible. The design is a little geometric, but that’s the Rocketman in me. I develop software for a living so guess what, I tend to be logical and geometric designs are natural for me.

So how did it go?

Continue reading First Slumped Fused Glass Bowl
Posted on Leave a comment

Fused Glass Coasters for My Son

Fused Glass Coasters - Before Firing

My son recently purchased and moved into a new apartment, his first, so thoughts turned to an ‘apartment warming’ gift. I thought about making a clock to match his décor, but the last clock I made didn’t work that well so I decided not to test my luck.

After a little thought and discussion with Ann a set of coasters seemed a good idea. I had made a set previously and they worked okay, so I felt confident.

His décor is basically black and white, with a few blue highlights. So I decided to try and do something similar. Not knowing the exact colour of blue meant a bit of a guesswork was needed.

I decided on a design that is a little geometric to also match what I think is his style, plus it wasn’t to challenging.

But, as usual, it didn’t all go as planned.

Continue reading Fused Glass Coasters for My Son
Posted on Leave a comment

Full Fuse for Dots

Fused Glass Dots

My apologies, again, I forgot to take an ‘after’ photo of the firing, but you should get the idea from my comments.

This firing was just to create a stack of clear and black dots, as well as rescue a few that didn’t work in a previous firing.

My plan for the dots is to use them in other items as decoration. Clear dots on a colour, when fully fused, give the appearance of a hole in the item. Many together give a sort of honeycomb appearance. The black dots will make great decoration as well, resulting in a nice defined point of reference for the eye. Mind you, being really new at this I can imagine a lot more uses and I am keen to experiment with these.

Anyway, on with the firing.

Continue reading Full Fuse for Dots
Posted on 2 Comments

Clear Capped Cabochons

Clear Capped Cabochons

In this firing I tried making cabochons with three layers of glass. This probably is a more normal method, capping with clear glass, so I expected this to work well and with few issues. As usual, I added a few other bits to see what happened.

This probably going to be my approach always; adding extra bits to fill in space and for testing. Making good use of the space in a kiln is surely much more economical and a good practice to adopt, but thinking of what to include does take a bit of thought.

Continue reading Clear Capped Cabochons
Posted on Leave a comment

Test Cabochons and More

Test Cabochons

This full fuse firing was all about testing a few ideas to make glass cabochons for jewellery. You will notice in the ‘Before’ photo that the items are placed on separate pieces of BullsEye Thinfire kiln shelf paper. For no specific reason other than to use up the paper offcuts.

All glass is BullsEye COE 90. Most glass is 3mm, but there were a few 2mm pieces in some stacks. Everything was fired to a full fuse. The Firing Schedule I used is shown below.

Continue reading Test Cabochons and More
Posted on Leave a comment

First Attempt at a Fused Glass Clock

Clock Face

This was my first attempt at a fused glass clock face, but it was a bit of a disaster from the beginning. However, there are a few lessons to be learnt here.

First one is to take better photos. The one and only photo I have is by my iPhone and it isn’t great, but you should get the idea. Taking photos is a fantastic way of documenting your efforts, successes and failures. Combine this with details of the design, materials used, firing schedule and results and you have a great log for future reference. I just have to follow my own advice:)

The concept was a black and white clock face with a city skyline in silhouette. The black and white I felt would give a nice clean and simple feel that could fit into any décor.

Continue reading First Attempt at a Fused Glass Clock
Posted on Leave a comment

First Glass Fusing for a Puddle

Fused Glass Cabochons

This was a milestone – my very first glass fuse firing.

What’s a glass puddle? Well, I didn’t have the faintest when I first heard the term. It is basically a technique for creating jewellery cabochons.

The idea is to layer up a number of pieces of art glass in complimenting colours, then full fuse that together into a puddle. The glass completely fuses down and melts together into what is literally a puddle of glass.

You then break that up, and that is a challenge, into small pieces, set them on edge and again fire to a full fuse. Other than deciding what colour glass to use and how to layer it up, there is not a lot of control over the final result. I suppose it was this that attracted me to the idea; the mystery of the final result.

Continue reading First Glass Fusing for a Puddle