Posted on 2 Comments

Making a Fused Glass Part Sheet

Fused Glass Part Sheet

If you are not already familiar with part sheets, they are simply custom made sheets of glass with some sort of pattern. The pattern could be anything, even plain colours if you desire.

These sheets are then cut up and used as components in some other project, such as a central feature in a glass bowl.

Anyway, this post is about creating a part sheet using powdered frit. Continue reading Making a Fused Glass Part Sheet

Posted on 2 Comments

Turquoise Fused Glass Honeycomb Bowl

Honeycomb Plate

This project has been hanging around on my list for some time now.  Not sure why exactly, but it may be because I knew it would be a little tedious. You will see what I mean a little later.

Anyway, the time came to give it a go.

Continue reading Turquoise Fused Glass Honeycomb Bowl

Posted on Leave a comment

Coasters for Fay

Fused Glass Coasters

Is there a theme starting here? A clock for Jacob, now coasters for Fay! Mmm…maybe not.

Anyway, yes, this is a set of coasters for my sister Fay. Not the first post on coasters, but each has been a learning experience and a lot of fun making.

These had to match her kitchen decor so powder blue and white were the thing. So let’s get into it. Continue reading Coasters for Fay

Posted on Leave a comment

Fused Glass Clock for Jacob

Fused Glass Clock

My first attempt at a clock worked out fine, for a while at least. That is until the clock fractured through the hole I had drilled the hole for the movement. It was hanging on the wall in the studio at the time so you can guess what happened when it hit the concrete floor.

Time has come for another clock. This time as a gift for my grandson Jacob. Continue reading Fused Glass Clock for Jacob

Posted on Leave a comment

Rocket & Solar System Cheeseboard – ‘Dying of the Light’

Fused Glass Rocket Cheeseboard

Hey, what do you expect from Rocketman? OK, a cheeseboard is a bit of an anti-climax, but my rockets are in being serviced.

So, until I get my rockets back, I thought I would make a fused glass cheeseboard. Nothing too demanding, but just a little artistic. You could also use it as a small cutting board, a fruit platter and so on.

So here is how it came about.

Continue reading Rocket & Solar System Cheeseboard – ‘Dying of the Light’

Posted on Leave a comment

Choosing a Glass for Kilnforming

Yes, this may be slanted towards Bullseye Glass, but it contains some valuable information you should consider before choosing which glass supplier to use, and which COE.

Personally, something I gained from this video is the information that compatibility can’t be guaranteed purely by the COE. Other factors are involved and must be considered.

Anyway, this is worth a few minutes of your time to view. Hope this helps.